multi-band distortion processor

This is the 1st prototype of this module, though it only needs a few tweaks to get the gains of each channel more equal and some minor changes to the panel.

Basically it splits the input signals into 4 frequency bands, these go into fuzz circuits and vactrol based VCAs, then summed to the output or use the individual channel outputs. You can blend the clean/distorted signal and vary the fuzz characteristics.

note: current panels are white/gold

business card aka chaotic analogue neuron

vactrol PiLL

PCBs - USD10
panels -USD20
assembled - USD100
shipping (regular airmail) - USD5 per order

New versions have white/gold panels and no LED.

NLC thru a Miku Stomp

Nonlinearcircuits Neuron/diff-rectifier available in 5U

Analog Craftsman are selling the neuron/diff-rect in 5U format. Have a look HERE.

Please note, I supply the PCBs but do not build these myself.

reflow soldering oven

2015 will bring some changes. I have built a reflow oven using the excellent controleo2 kit. This will be used for small production runs of various modules, the 1st one will be super Sloths. These will be initially available directly from me. So if you can't solder & want some NLC, now is your chance:)