These are built by ME, available in regular or super version
US$85 each
shipping by registered airmail is US$15 per order outside of Australia
US$5 per order within Aust. (as in - buy one or ten, shipping is the same)
This is a true chaotic CV generator (as in real chaos, not using the name as a buzzword). the regular version produces signals at approx 16 seconds per cycle, the super version takes 16 minutes per cycle. If you like slowly changing, never repeating ambience, these are for you.
The panels are 2mm blue with Gold finished metal lettering suitable for Eurorack systems
nonlinearcircuits -
ANALOGUE modular synthesizers
(no midi, no software, no microprocessors)
PCBs and Modules LIST
Tuesday, 31 March 2015
Tuesday, 17 March 2015
ADSR312 - envelope generator
This was also developed for the WAMod synth building workshops, but some PCBs and panels are available
PCB - US$18
panel - US$20
shipping - US$5 per order
This circuit is based on the Aries 312 envelope generator. It is a very capable, easy to use and discrete (no CMOS or op amps) ADSR with a re-trigger function for more complex envelopes.
PCB - US$18
panel - US$20
shipping - US$5 per order
This circuit is based on the Aries 312 envelope generator. It is a very capable, easy to use and discrete (no CMOS or op amps) ADSR with a re-trigger function for more complex envelopes.
Collude - envelope follower & amp
This was developed for the WAMod synth building workshops, but some PCBs and panels are available
PCB - US$18
panel - US$20
shipping - US$5 per order
A fairly straightforward envelope follower and an amp circuit giving up to 20X signal gain. It means you can connect a guitar or microphone to your synth and generate a gate, an envelope and the audio signal at standard synth voltage levels.
The envelope circuit has a 'response' pot which actually greatly increases the gain on the envelope and is useful for very low level signals, there is a trade-off of some distortion on the envelope at high gain settings.
PCB - US$18
panel - US$20
shipping - US$5 per order
A fairly straightforward envelope follower and an amp circuit giving up to 20X signal gain. It means you can connect a guitar or microphone to your synth and generate a gate, an envelope and the audio signal at standard synth voltage levels.
The envelope circuit has a 'response' pot which actually greatly increases the gain on the envelope and is useful for very low level signals, there is a trade-off of some distortion on the envelope at high gain settings.
Friday, 13 March 2015
42Hp CV Controlled Matrix Mixer
This one has 8 inputs and 4 outputs, under the hood are 32 VCAs and 4 mixers. Bit of a challenging build!
PCB - US$40
panel - US$50
assembled - US$440
please note - panels are now white/gold
PCB - US$40
panel - US$50
assembled - US$440
please note - panels are now white/gold
dual LFO with difference rectifier
This was developed for the local WAMOD synth workshops, a few spares are available.
PCB - US$18
panel - US$20
shipping $5 per order
Two wide ranging LFOs; from approx 830 Hz down to 0.02Hz (1 cycle every 50 seconds), giving tri and square waveforms. There is also a difference rectifier onboard which gives signal corresponding to the positive and negative aspects of the difference between the two tri waves.
All thru holes components, no wiring to do.
PCB - US$18
panel - US$20
shipping $5 per order
Two wide ranging LFOs; from approx 830 Hz down to 0.02Hz (1 cycle every 50 seconds), giving tri and square waveforms. There is also a difference rectifier onboard which gives signal corresponding to the positive and negative aspects of the difference between the two tri waves.
All thru holes components, no wiring to do.
Subscribe to:
Posts (Atom)