32:1

Only had a short play with this so far but already am finding it a very interesting module and suspect I want to have 2 of them. Send signals from one VCO to the clock and input, split the waveform up into 2 -32 sections (use reset to select how many), send some or all of these sections off to various VCFs, waveshapes, VCAs, etc. Then use a 2nd 32:1 to put all the sections back together....or forget the FX and just put the sections back together in a different order to create a new waveshape.
What is it? a 1:32 or 32:1 mux. It can split one input signal into 32 outputs or switch 32 inputs into 1 output. Use the reset to get lower counts and the direction control to add a dash of complexity to your mux. If nothing is patched into the in/out jack, it works as a 32 stage counter.

Update: please note there is a small glitch with out 1 which gives an extra trigger on count 17. For most duties it is not noticable, tho it is when the module is used as a gate/trigger generator. In this case maybe do not use out 1 and enjoy the other 31 outs instead, or use out 1 and enjoy a bonus extra trigger pulse. The false trigger is caused by a slight delay when switching the Enable function on/off on the DG508 ICs.

Anyway, it looks like this: